Differential ID Page 2

GENERAL MOTORS FRONT AND REAR UNITS

10 BOLT COVER 8.5 in REAR --------10 1/8 in C TO C
10 BOLT COVER 8.5 in FRONT --------9 1/4 in C TO C
10 BOLT COVER 8.2 in REAR -------------TBA----C TO C
10 BOLT COVER 7.5 in REAR ---------9 1/8 in C TO C
12 BOLT COVER 8 7/8 in REAR CAR-9 5/8 in C TO C
12 BOLT COVER 8 7/8 in REAR TRUCK-9 3/4 in C TO C
14 BOLT COVER 9.5 in REAR -----------11 3/4 in C TO C
14 BOLT COVER 10.5 in REAR ----------12 1/8 in C TO C

FORD MOTOR CO. FRONT AND REAR UNITS

10 BOLT COVER 7.5 in REAR ----------9 1/4 in C TO C
10 BOLT COVER 8.8 in REAR ----------9 1/2 in C TO C
10 BOLT COVER 8.8 in ICA FRONT------9 1/2 in C TO C
12 BOLT COVER 9.75 in REAR ---------TBA------C TO C
12 BOLT COVER 10.25 in REAR --------11 1/8 in C TO C
12 BOLT COVER 10.50 in REAR --------11 1/8 in C TO C
9 inch HAS NO COVER, AND HAS REMOVABLE CENTER SECTION!! NOTE: FORD MOTOR COMPANY ALSO USES A WIDE ARRAY OF DANA BUILT FRONT AND REAR DIFFERENTIAL UNITS, IF THE FORD VEHICLE IN QUESTION DOES NOT COMPLY WITH THE ABOVE CRITERIA, SEE THE DANA FRONT AND REAR CHARTS IN THE PROVIDED LINK BELOW.

CHRYSLER CORPORATION REAR UNITS

10 BOLT COVER 7.25 in REAR -----------8 7/8 in C TO C
10 BOLT COVER 8.25 in REAR -----------10 1/8 in C TO C
12 BOLT COVER 9.25 in REAR -----------11 1/4 in C TO C
NOTE: ANY CHRYSLER CORP. VEHICLE THAT DOES NOT COMPLY WITH THE ABOVE CRITERIA WILL NEED TO BE IDENTIFIED BY REFERRING TO THE DANA DIFFERENTIAL CHARTS IN THE PROVIDED LINK BELOW.

How To Figure Ring And Pinion Ratios

How To Measure Differential Size